Decrement delay
The term ‘decrement delay’ refers to the time it takes for heat to pass through an element of a building (such as an external wall or roof). Typically this is taken to be the delay in hours between the peak temperature of the outer surface of the element on a summer day and the resulting peak temperature of the internal surface.
This concept reflects increasing awareness that the thermal behaviour of buildings is dynamic, rather than static, and that thermal mass, as well as thermal insulation, has a significant impact on the energy efficiency of a building. For example, two buildings with identical U-values may perform very differently depending on their decrement delay, with a longer delay likely to reduce peak loads on building services systems.
Materials with a low lambda value (sometimes referred to as thermal conductivity or k-value), high specific heat capacity and high density will tend to have a high decrement delay.
The term ‘decrement factor’ refers to the amount by which conditions are moderated by an element of a building. So in the case of the peak temperature on the outer surface of a building on a summer day, this would be the amount by which the peak is reduced by the time it reaches the inner surface. It is expressed as the ratio between the internal surface cyclic temperature variation compared to the external surface.
To reduce summer overheating, a low decrement factor is required, and a decrement delay of 6 to 12 hours.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
BSRIA Building Reg's guidance: The second staircase
An overview focusing on aspects which most affect the building services industry.
Design codes and pattern books
Harmonious proportions and golden sections.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.
Quick summary by size, shape, test, material, use or bonding..